2011年
(1) Qian CONG, Fumin XU, Yi TAN, Xiaolei SHI, Wei DONG, Jiayan LI and Junshan ZHANG: Influence of heat treatment on microstructure and mechanical properties of Al/Al-Cu graded materials, Acta Metallurgica Sinica(English letters), 24(2) (2011) 118-124.
(2) 张慧星, 谭毅, 孙世海, 许富民, 姜大川: 定向凝固对工业硅杂质及电阻率的影响, 机械工程材料, 35(3) (2011) 52-55.
(3) Xiaolei Shi, Yali Dong, Fumin Xu, Yi Tan, Lai Wang, Jenn-ming Yang: Preparation and properties of nano-SiC strengthening Al2O3 composite ceramics, Materials Science and Engineering A, 528(2011) 2246-2249.
(4) Wei Dong, Xu Peng, Dachuan Jiang, Yi Tan, Qiang Wang, Guobin Li: Calcium evaporation from metallurgical grade silicon by an electron beam melting, Material Science Forum, 675-677(2011) 41-44.
(5) Wei Dong, Qiang Wang, Xu Peng, Yi Tan, Dachuan Jiang: Removal of Phosphorus in Metallurgical Grade Silicon Using Electron Beam Melting, Material Science Forum, 675-677(2011) 45-48.
(6) Jiayan Li, Yi Tan, Mei Liu, Wei Dong: Effect of the Si3N4 Coating on the Mc-Si Ingot in the Process of Multicrystalline Silicon Purification by Metallurgical Methods, Materials Science Forum, 675-677(2011) 1311-1314.
(7) Dachuan JIANG, Wei DONG, Yi Tan, Qiang Wang, Xu Peng, Guobin Li: Investigation on the Removal of B Impurity in Metallurgical Grade Si by Electron Beam Melting, Materials Science Forum, 675-677(2011) 29-32.
(8) Lei Zhang, Jiayan Li, Haoyang Wang, Fumin Xu, Yi Tan: Effect of heating treatment on the resistivity of polycrystalline silicon, Material Science Forum, 675-677(2011) 113-116.
(9) Shihai Sun, Yi Tan, Huixing Zhang, Wei Dong, Junshan Zhang, Genxiong Hu: Effect of Pulling Rate on Multicrystalline Silicon Ingot during Directional Solidification, Materials Science Forum, 675-677(2011) 53-56.
(10) Zhijun. Zhang, Fumin Xu, Yi Tan, Xiaolei Shi, Wei Dong: Microstructure and Mechanical Properties of AlN Ceramics Sintered with Yttrium Nitrate, Materials Science Forum, 675-677(2011) 159-16
(11) Qian Cong, Fumin Xu, Jiayan Li, Yi Tan, Xiaolei Shi, Shuang Shi, Wei Dong: Fabrication and properties of Al/Al-Cu functionally graded material, Material Science Forum, 675-677(2011) 575-578.
(12) Qizhi Xing, Wei Dong, Shuang Shi, Guobin Li, Yi Tan: Effects of Impurities Distribution on the Crystal Structure and Electrical Properties of Multi-crystalline Silicon Ingots, Material Science Forum, 675-677(2011) 101-104.
(13) Ruixun Zou, Dachuan Jiang, Wei Dong, Zheng Gu, Yi Tan: Transition-metal Impurities Removal from Metallurgical Grade Silicon by Electron Beam Injection, Material Science Forum, 675-677(2011) 105-108.
(14) Shuang Shi, Wei Dong, Shihai Sun, Yi Tan, Guobin Li, Fumin Xu: Resistivity distribution characteristics of metallurgical silicon ingot after directional solidification, Material Science Forum, 675-677(2011) 109-112.

2010年
(15) DONG Wei, WANG Qiang, PENG Xu, TAN Yi, JIANG Dachuan, LI Guobin: Aluminum Evaporation from Metallurgical Silicon in Electron Beam Melting Process, Chinese Journal of Materials Research, 24(6) (2010) 592-596.
董伟, 王强, 彭旭, 谭毅, 姜大川, 李国斌: 电子束熔炼冶金级硅除铝研究, 材料研究学报, 24(6) (2010) 592-596.
(16) JI Ming, DONG Wei, TAN Yi, SUN Shihai, LI Guobin: Purification Behavior of Impurity Aluminum in Multicrystalline Silicon by Vacuum Induction Melting and Directional Solidification Method, Chinese Journal of Materials Research, 24(4) (2010) 373-377.
冀明, 董伟,谭毅,孙世海,李国斌: 真空感应熔炼和定向凝固制备多晶硅中铝的除杂, 材料研究学报, 24(4) (2010) 373-377.
(17) Yi Tan, Wei Dong, Dachuan Jiang, Lifu Zhang: The Current and Future Prospects of PV Industry in China, Shine, (06) (2010).
谭毅, 董伟, 姜大川, 张力夫: 我国光伏产业现状及发展前景, 中国光能, (06) (2010).
(18) Xiaolei Shi, Yi Tan, Fumin Xu, Lai Wang: Mechanical properties of hot-pressed B4C-SiC composites, Ceramic Transactions, 220(2010) 189-196.
(19) Xiaolei Shi, Yi Tan, Fumin Xu, Yali Dong, Zhijun Zhang, Lai Wang, Xiaona Li: Mechanical properties of Al2O3-SiC-C composites using polycarbosilane as SiC precursor, Journal of alloy and compounds, 490(2010) 484-487.
(20) Xiaolei Shi, Fumin Xu, Yali Dong, Yi Tan, Lai Wang: Mechanical properties of hot-pressed Al2O3/SiC composites, Materials Science and Engineering A, 527(2010) 4646-4649.
(21) Xiaolei Shi, Yi Tan, Fumin Xu, Jiayan Li, Yali Dong, Lai Wang: Hot-pressed A12O3-SiC(-C) composites with polycarbosilane as the precursor, Materials and Design, 31(2010) 1628-1632.
(22) JIANG Da-chuan, DONG Wei, TAN Yi, WANG Qiang, PENG Xu, LI Guo-bin: Investigation on Removal of Aluminum Impurity in Metallurgical Grade Silicon by Electron Beam Melting, Journal of Materials Engineering, (08) (2010) 8-11.
姜大川, 董伟, 谭毅, 王强, 彭旭, 李国斌: 电子束熔炼多晶硅对杂质铝去除机制研究, 材料工程, (08) (2010) 8-11.
(23) JIANG Da-chuan, TAN Yi, DONG Wei, WANG Qiang, PENG Xu, LI Guo-bin: Effect of Beam Density of Electron Beam on Phosphorus Impurity in Metallurgical Grade Silicon, Journal of Materials Engineering, (03) (2010) 18-21.
姜大川, 谭毅, 董伟, 王强, 彭旭, 李国斌: 电子束束流密度对冶金硅中杂质磷的影响, 材料工程, (03) (2010) 18-21.
(24) ZHANG Lei, LI Jiayan, TAN Yi, SUN Yan: Fabrication of Silicon Carbide Fibers by Electrospinning, Materials Review, 24(4) (2010) 81-83.
张磊, 李佳艳, 谭毅, 孙妍: 静电纺丝法制备SiC纤维, 材料导报, 24(4) (2010) 81-83.
(25) ZHANG Lei, LI Jia-yan, TAN Yi, SUN Yan: Micro-Sized TiO_2 Fibers Prepared by Electrospinning, Materials for Mechanical Engineering, 34(8) (2010) 18-20.
张磊, 李佳艳, 谭毅, 孙妍: 静电纺丝法制备TiO2纳米纤维, 机械工程材料, 34(8) (2010) 18-20.
(26) WANG Qiang, DONG Wei, TAN Yi, JIANG Da-chuan, PENG Xu, LI Guo-bin: Investigation on the removal of phosphorus, aluminum, calcium from metallurgical grade silicon using electron beam melting, Journal of Functional Materials, 41(2010) 144-147.
王强, 董伟, 谭毅, 姜大川, 彭旭, 李国斌: 电子束熔炼去除冶金级硅中磷、铝、钙的研究, 功能材料, 41(2010) 144-147.
(27) PENG Xu, DONG Wei, TAN Yi, JIANG Da-chuan, WANG Qiang, LI Guo-bin: Evaporation behavior of calcium in metallurgical silicon by an electron beam melting method, Journal of Functional Materials, 41(2010) 117-120.
彭旭, 董伟, 谭毅, 姜大川, 王强, 李国斌: 电子束熔炼冶金级硅中杂质钙的蒸发行为, 功能材料, 41(2010) 117-120.

2009年
(28) 王强, 董伟, 谭毅, 张聪: 电子束熔炼对硅中杂质去除效果影响研究, 第十二届全国青年材料科学技术研讨会论文集.
(29) 谭毅, 姜大川, 徐云飞, 董伟, 王强, 彭旭: 电子束熔炼时间对多晶硅杂质去除效果研究, 第三届中国储能与动力电池及其关键材料学术研讨与技术交流会第三届中国储能与动力电池及其关键材料学术研讨与技术交流会论文集, 2009年.
(30) SHI Xiaolei, XU Fumin, ZHANG Zhijun, DONG Yali, WANG Lai, TAN Yi: FRICTION AND WEAR PROPERTIES OF Al_2O_3-SiC COMPOSITE CERAMICS, Journal of the Chinese Ceramic Society, 37(2009) 778-782.
石小磊, 许富民, 董亚丽, 王来, 谭毅: Al2O3-SiC复相陶瓷的摩擦磨损特性, 硅酸盐学报, 37(2009) 778-782.
(31) SHI Xiao-lei, ZHANG Cong, TAN Yi, XU Fu-min, DONG Ya-li, WANG Lai: Preparation and Properties of B_4C-SiC Composite Ceramics, Materials for Mechanical Engineering, 33(2009) 77-80.
石小磊, 张聪, 谭毅, 许富民, 董亚丽, 王来: B4C-SiC复相陶瓷的制备与性能评价, 机械工程材料, 33(2009) 77-80.
(32) Yan Sun, Jiayan Li, Yi Tan, Lei Zhang: Fabrication of aluminum nitride (AlN) hollow fibers by carbothermal reduction and nitridation of electrospun precursor fibers, Journal of Alloys and Compounds, 471(2009) 400-403.
(33) Yali Dong, Fumin Xu, Xiaolei Shi, Cong Zhang, Zhijun Zhang, Jenn Ming Yang, Yi Tan: Fabrication and mechanical properties of nano-/micro-sized Al2O3/SiC composites, Materials Science and Engineering A, 504(2009) 49-54.
(34) DONG Ya-li, XU Fu-min, SHI Xiao-lei, TAN Yi: Recent progress of high purity Al2O3 ceramic, Materials Research and Application, 3(2) (2009): 81-84.
董亚丽, 许富民, 石小磊, 谭毅: 高纯Al2O3陶瓷的研究进展, 材料研究与应用, 3(2) (2009): 81-84.
(35) NING Likui, ZHENG Zhi, TAN Yi, LIU Enze, TONG Jian, YU Yongsi, WANG Hua: STUDY ON HOT CORROSION RESISTANCE OF A NEW DIRECTIONAL SOLIDIFICATION Ni-BASED SUPERALLOY, Acta Metallurgica Sinica, 45(2009) 161-166.
宁礼奎, 郑志, 谭毅, 刘恩泽, 佟健, 于永泗, 王华: 一种新型定向凝固镍基高温合金抗热腐蚀性能的研究, 金属学报, 45(2009) 161-166.
(36) ZHANG Zhijun, XU Fumin, TAN Yi: Research Progress in Thermal Conductivity and Sintering Additives of AlN Packaging Material, Materials Review, 23(2009), 56-62.
张志军, 许富民, 谭毅: AlN陶瓷基板材料热导率与烧结助剂研究进展, 材料导报, 23(2009), 56-62.
(37) JI Ming, DONG Wei, TAN Yi, SUN Shihai, LI Guobin: Purification Behavior of Impurity Aluminum in Multicrystalline Silicon by Vacuum Induction Melting and Directional Solidification Method, Chinese Journal of Materials Research, 24(4) (2009) 373-377.
冀明, 董伟, 谭毅, 孙世海, 李国斌: 真空感应熔炼和定向凝固制备多晶硅中铝的除杂, 材料研究学报, 24(4) (2009) 373-377.

2008年
(38) Yi Tan, Guocai Wu, Sung S.Suh, Jenn Ming Yang, H. Thomas Hahn: Damage tolerance and durability of selectively stitched stiffened composite structures, International Journal of Fatigue, 30(2008) 483-492.
(39) Yi Tan, Dachuan Jiang, Yunfei Xu, Shihai Sun, Fumin Xu, Guobin Li: Shine, (01) (2008).
(40) Jiayan Li, Yan Sun, Yi Tan, Fumin Xu, Xiaolei Shi, N. Ren: Zirconium nitride (ZrN) fibers prepared by carbothermal reduction of electrospun PVP /zirconium oxychloride composite fibers, Chemical Engineering Journal, 144(2008) 149-152.
(41) Jiayan Li, Yi Tan, Fumin Xu, Yan Sun, Xueqiang Cao, Yanfei Zhang: Hollow fibers of yttria-stabilized zirconia (8YSZ) prepared by calcination of electrospun composite fibers, Materials Letters, 62(2008) 2396-2399.
(42) SHI Xiao-lei, XU Fu-min, XU Jing-jing, WANG Lai, TAN Yi: Preparation and Properties of SiC Particles Reinforced PEEK Composites, Journal of Materials Engineering, (z1) (2008) 215-218.
石小磊, 许富民, 许菁菁, 王来, 谭毅: SiC颗粒增强PEEK基复合材料的制备与性能, 材料工程, (z1) (2008) 215-218.
(43) WEN Kai, XU Fu-min, TAN Yi: Performance Evaluation of a New Type of Fishplate Material Used for the High-speed Railway, Journal of Materials Engineering, 297(2008) 31-39.
闻凯, 许富民, 谭毅: 一种高速铁路用新型鱼尾板材料的性能评价, 材料工程, 297(2008) 31-39.
(44) WEN Kai, XU Fu-min, TAN Yi: Performance Evaluation of Two New Types of Fishplate Materials Used for High-speed Railway, Materials for Mechanical Engineering, 32(2) (2008) 49-52.
闻凯, 许富民, 谭毅: 两种高速铁路用新型鱼尾板材料的力学性能评价, 机械工程材料, 32(2) (2008) 49-52.
(45) ZHANG Wei-na, TAN Yi, XU Fu-min: Effect of Metallurgical Structure on Electrical Resistivity of Metallurgic Multicrystalline Silicon, Materials for Mechanical Engineering, 32(1) (2008) 17-20.
张伟娜, 谭毅, 许富民: 显微组织对冶金法制备多晶硅电阻率的影响, 机械工程材料, 32(1) (2008) 17-20.
(46) ZHANG Wei-na, LIN Zhe, TAN Yi: Microstructural and Mechanical Characterization of Thermite Weld in Rails at Different Preheating Processing Parameters, Materials for Mechanical Engineering, 32(4) (2008) 16-19.
张伟娜, 林哲, 谭毅: 预热时间对钢轨铝热焊焊缝组织和力学性能的影响, 机械工程材料, 32(4) (2008) 16-19.
(47) Zhang Weina, Xu Fumin, Tan Yi: Effect of Nickel Element on Electrical Resistivity of Polycrystalline Silicon, Chinese Journal of Rare Metals, 32(4) (2008) 473-477.
张伟娜, 许富民, 谭毅: 镍对冶金法制备多晶硅电学性能的影响, 稀有金属, 32(4) (2008) 473-477.
(48) LIN Zhe, TAN Yi, XU Fu-min: High Temperature Mechanical Properties of Ti-Al-Nb Alloys with Different Phase, Materials for Mechanical Engineering, 32(4) (2008), 58-61.
林哲, 谭毅, 许富民: 不同组成相钛-铝-铌三元合金的高温强度, 机械工程材料, 32(4) (2008), 58-61.
(49) ZHANG Lei, LI Jia-yan, SUN Yan, TAN Yi: Study on Preparation of the Fibers by Electrospinning, Journal of Materials Engineering, (z1) (2008) 331-336.
张磊, 李佳艳, 孙妍, 谭毅: 静电纺丝技术制备纤维的研究, 材料工程, (z1) (2008) 331-336.
(50) Cui Hongtao, Wu Aimin, Qin Fuwen, Tan Yi, Wen Lishi, Jiang Xin: Preparation of Poly-Si Film on Upgraded Metallurgical Si Substrate by ECR-PECVD, Semiconductor Technology, 33(2) (2008), 117-120.
崔洪涛, 吴爱民, 秦福文, 谭毅, 闻立时, 姜辛: 升级冶金级Si衬底上ECR-PECVD沉积多晶Si薄膜, 半导体技术, 33(2) (2008), 117-120.

2007年
(51) Fumin Xu, WU Lawrece Chi-man, Guangwei Han, Yi Tan: Compression creep behavior of high volume fraction of SiC particles reinforced Al composite fabricated by pressureless infiltration, Chinese Journal of Aeronautics, 20(2007) 115-119.
(52) Guocai Wu, Yi Tan, Jenn Ming Yang: Evaluation of risidual strength of notched fiber metal laminates, Materials Science and Engineering A, 457(2007) 338-349.
(53) ZHANG Wei-na, XU Fu-min, TAN Yi: Species Characteristic and Formation of Microdefect in Accept Thermite Weld Joint in Rails, Materials for Mechanical Engineering, 31(11) (2007) 40-43.
张伟娜, 许富民, 谭毅: 钢轨铝热焊缝的微观缺陷种类和形成机制, 机械工程材料, 31(11) (2007) 40-43.
(54) Xu Yunfei, Tan Yi, Jiang Dachuan, Xu Fumin: Inclusion Removal in Multi-crystal Silicon Fabricated by Metallurgical Method, Special Casting & Nonferrous Alloys, 27(9) (2007) 730-732.
徐云飞, 谭毅, 姜大川, 许富民: 冶金法制备多晶Si杂质去除效果研究, 特种铸造及有色合金, 27(9) (2007) 730-732.
(55) YU Hong-yan, SHI Xiao-lei, XU Fu-min, TAN Yi: Effect of Infiltration Copper or Aluminium on Flexural Strength of C/C Composite Materials, Materials for Mechanical Engineering, 31(2007), 61-64.
虞红燕, 石小磊, 许富民, 谭毅: 浸渗铜、铝对碳/碳复合材料弯曲性能的影响, 机械工程材料, 31(2007), 61-64.